AIYAPLAY 24V 2-Seater Electric Truck (370-420V70) Battery & Charger
This truck uses either one 24V 7Ah battery or two 12V 7Ah batteries, depending on the version. Check the label under the seat to see which yours has. Its charger is 24V (24–28.8V output).
You need:
24V 7Ah Battery Pack (F2) or the compatible alternative shown below and a 24V charger (details below)
Tip: Before buying, check that your old battery's voltage and size match.

Check which battery setup your truck has before choosing.
If your truck has one 24V battery
24V 7Ah Battery Pack (F2)
24V battery.
- Standard size: 24V 7Ah, F2 terminals
More details
- Also sold as
- 12FM7, 24V7AH/20HR
- Spec
- One-piece 24V 7Ah sealed lead-acid, F2 terminals, about 7.2 x 4.1 x 3.8 in. Matches ANPABO's official replacement battery. If your car has two 12V batteries, this is not the right part.
Matched by voltage, Ah and connector. Questions about fit? Ask the seller before buying.
All models that use this batteryIf your truck has two 12V batteries (buy 2)
12V 7Ah Battery (F2)
12V battery.
- Standard size: 12V 7Ah, F2 terminals
More details
- Also sold as
- ML7-12F2, RG1270T2
- Spec
- 12V 7Ah sealed lead-acid, F2 (1/4 in) terminals, about 5.9 x 2.5 x 3.9 in. Battery only: move the original wires and fuse to the new battery. Use this if your old battery has wide (1/4 in) tabs.
Matched by voltage, Ah and connector. Questions about fit? Ask the seller before buying.
All models that use this batteryCharger
24V charger (24–28.8V output). Match the amps and plug on your old charger's label, or contact AIYAPLAY support for a replacement. Charge 8 to 10 hours, never more than 20. The charging port is under the seat.
If your two 12V batteries have narrow tabs, see the narrow-tab (F1) 12V 7Ah battery.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Specs
| Model line | 2-Seater Ride-On |
|---|---|
| Product number | 370-420V70 |
| Voltage | 24V |
