Hikiddo 24V 2-Seater Truck (JC222) Battery & Charger

The Hikiddo 24V 2-Seater Truck (JC222) uses two 12V 7Ah batteries (24V total) and a 28.8V 500mA charger.

You need:

2 × 12V 7Ah batteries (F1 or F2, see below) and a 24V charger (details below)

Tip: This truck uses two 12V batteries.

Hikiddo 24V 2-Seater Truck (JC222) Hikiddo ride-on
Illustration — not an official product photo.

Compare the metal tabs on your old battery before choosing: wide tabs are F2, narrow tabs are F1.

Battery: wide tabs (F2, 1/4 in) (buy 2)

12V 7Ah Battery (F2)

12V battery.

Standard size: 12V 7Ah, F2 terminals
More details
Also sold as
ML7-12F2, RG1270T2
Spec
12V 7Ah sealed lead-acid, F2 (1/4 in) terminals, about 5.9 x 2.5 x 3.9 in. Battery only: move the original wires and fuse to the new battery. Use this if your old battery has wide (1/4 in) tabs.

Compatible alternative (not made by Hikiddo)

Compatible battery on Amazon

Matched by voltage, Ah and connector. Questions about fit? Ask the seller before buying.

All models that use this battery

Battery: narrow tabs (F1, 3/16 in) (buy 2)

12V 7Ah Battery (F1)

12V battery.

Standard size: 12V 7Ah, F1 terminals
More details
Spec
12V 7.2Ah sealed lead-acid, F1 (3/16 in) narrow terminals, 5.94 x 2.56 x 3.94 in. Use this if your old battery has narrow tabs.

Compatible alternative (not made by Hikiddo)

Compatible battery on Amazon

Matched by voltage, Ah and connector. Questions about fit? Ask the seller before buying.

All models that use this battery

Charger

Hikiddo's charger puts out 28.8V 500mA. That's normal for a 24V system. The charging port is under the seat. First charge 8 to 12 hours, never more than 20. Match your old charger's plug.

We may earn a small commission if you buy through these links, at no extra cost to you.

Stock changes often, so availability may vary by store.

Specs

Model lineRide-On Truck
Product numberJC222
Voltage24V

Other Ride-On Truck models