TOBBI 24V Drift Go-Kart (TH17E0987) Battery & Charger
The TOBBI 24V Drift Go-Kart (TH17E0987) uses two 12V 7Ah batteries (24V total) and a charger with 28.8V 800mA output.
You need:
2 × 12V 7Ah batteries (F1 or F2, see below) and a 24V charger (details below)
Tip: This car uses two 12V batteries. Don't use TOBBI's single 12V replacement battery.

Compare the metal tabs on your old battery before choosing: wide tabs are F2, narrow tabs are F1.
Battery: wide tabs (F2, 1/4 in) (buy 2)
12V 7Ah Battery (F2)
12V battery.
- Standard size: 12V 7Ah, F2 terminals
More details
- Also sold as
- ML7-12F2, RG1270T2
- Spec
- 12V 7Ah sealed lead-acid, F2 (1/4 in) terminals, about 5.9 x 2.5 x 3.9 in. Battery only: move the original wires and fuse to the new battery. Use this if your old battery has wide (1/4 in) tabs.
Matched by voltage, Ah and connector. Questions about fit? Ask the seller before buying.
All models that use this batteryBattery: narrow tabs (F1, 3/16 in) (buy 2)
12V 7Ah Battery (F1)
12V battery.
- Standard size: 12V 7Ah, F1 terminals
More details
- Spec
- 12V 7.2Ah sealed lead-acid, F1 (3/16 in) narrow terminals, 5.94 x 2.56 x 3.94 in. Use this if your old battery has narrow tabs.
Matched by voltage, Ah and connector. Questions about fit? Ask the seller before buying.
All models that use this batteryCharger
TOBBI's charger puts out 28.8V 800mA. The charging port is under the seat. First charge at least 12 hours; after that 10 to 12 hours, never more than 20. Match the output voltage and plug on your old charger's label, or contact TOBBI support for an original.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Specs
| Model line | Go-Kart |
|---|---|
| Product number | TH17E0987 |
| Voltage | 24V |



