Umatoll UT501 Electric Wiggle Car Battery & Charger
The Umatoll UT501 uses a 12V 4.5Ah sealed lead-acid battery with plug connectors and a 12V 0.5A charger.
You need:
a 12V battery (details below) and a 12V charger (details below)
Tip: Before buying, check that your old battery's voltage and size match.

Battery
12V 4.5Ah sealed lead-acid battery with red and black plug connectors. To swap it, open the seat, remove the bracket, unplug the red and black connectors, and lift the battery out. Match the voltage, Ah, size and connector on your old battery's label, or contact Umatoll support about a replacement.
Charger
Umatoll's charger puts out 12V 0.5A (500mA). The charging port is under the car. Check the plug on your old charger's label. Charge 4 to 6 hours, never more than 20. Light: red = charging, green = full.
How to match your parts
Battery
Read your old battery's label (volts and Ah). Check the metal tabs: narrow (F1, 3/16 in), wide (F2, 1/4 in), or a plug. Count how many batteries your car has, and measure the size.
Charger
Read the OUTPUT line on your old charger (volts and amps) and match its plug shape. Lead-acid and lithium batteries need different chargers; never mix them.
Specs
| Model line | Wiggle Car |
|---|---|
| Product number | UT501 |
| Voltage | 12V |
Other Wiggle Car models
- aigo E7 Joyride Electric Wiggle CarE7 · 21.6V

- FanttikRide N10 Classic Electric Wiggle CarN10 Classic · 6V

- FanttikRide N10 Pro Electric Wiggle CarN10 Pro · 12V

- FanttikRide N10 Ultra+ Electric Wiggle CarN10 Ultra+ · 12VWiggle Car
- FanttikRide N7 Classic Electric Wiggle CarN7 Classic · 6V

- FanttikRide N7 Pro Electric Wiggle CarN7 Pro · 12V
